Introduce
UV
Lasers
Visible
DPSS Lasers
Visible Diode collimated Lasers
Infrared DPSS Lasers
914nm Infrared DPSS Lasers
946nm Infrared DPSS Lasers
1030nm Infrared DPSS Lasers
1047nm Infrared DPSS Lasers
1053nm Infrared DPSS Lasers
1064nm Infrared DPSS Lasers
1086nm Infrared DPSS Lasers
1112nm Infrared DPSS Lasers
1319nm Infrared DPSS Lasers
1342nm
Infrared DPSS Lasers
1342nm Lasers (1-1000mW)
1342nm Lasers
(1200-1800mW)
1342nm Lasers (2W-3W)
1342nm Lasers (4-6W)
Infrared Diode collimated Lasers
Low
Noise Lasers
Single
Longitude Mode Lasers
Q-switched / Pulsed Lasers
RGB
/ RG Lasers
Fiber Lasers
Laser Pointers
Laser Collimator
Laser
Scanner System
Laser
Accessory |
DPSS 1342nm Infrared Laser |
|
|
|
Specifications: |
Model
|
SDL-1342-XXXT |
Output Power @ 25 ¡æ |
4-6W |
Wavelength |
1342+/-1nm |
Operation Mode |
CW, TEM00 |
Spectral line width |
<0.1nm |
Power stability after warm-up |
<1,<3%,<5% (over 2/4/8 hours) |
Warm-up time |
< 10 minutes |
M2 factor |
< 2 |
Beam divergence (1/e2, Full Angle)
|
<2.0mrad |
Beam diameter at the aperture |
<3.0mm |
Point stability after warm-up |
<0.05mrad |
Polarization ratio |
>100:1 |
Ellipticity of beam |
< 10% |
Operating temperature |
10-35¡æ |
Dimension of Laser head |
333 x 140 x 125mm |
Power supply |
SDL-PS-800 |
Dimension of power supply |
300 x 162 x 134mm |
Expect life time |
10000 hours |
Warranty time |
1 year |
Modulation |
TTL Modulation >5KHz or analog Modulation >2KHz |
|
|
Note: |
|
See
the Glossary and Technology for information about the terms used |
|
In
the front of the laser, we add an infrared
filter. The residual IR part is less
than 10-3. Please refer to the
technology page for more information
about the filter. |
|
Other
Sytles and custom designs are available.
Contact us to discuss your needs. |
|
|
|
|